[Healeys] Looking for ideas

Michael Salter michaelsalter at gmail.com
Fri Jun 26 03:52:41 MDT 2015


Thanks to all for the good ideas some I have already tried without
success....Looks like cutting and drilling is to be the order of the
day..unfortunately those pins are case hardened which won't make things
easier.
If all else fails new brackets..

Michael S
BN1 #174

On Thu, Jun 25, 2015 at 5:42 PM, Michael <michael.salter at gmail.com> wrote:

> I left the seized shackle pins in both sides of this BN1 when it went off
> to TechnoStrip in the hope that they would come loose.
> They didn't so I've spent an inordinate amount of time trying to extract
> them without wreaking the mounts on the frame.
> Made a special puller, applied loss of heat, drilled right through each
> bush, grumbled a lot but they will not move despite being subjected to
> massive amount of force.
> Any ideas...damaging the mounts in the chassis makes for a very tedious
> repair.
> Michael S.
> BN1 #174
>



-- 
*If you can't fix it with a hammer, you've got an electrical problem.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150626/03dc2899/attachment.html>


More information about the Healeys mailing list