[Healeys] Looking for ideas

Chris Dimmock austin.healey at gmail.com
Thu Jun 25 23:38:33 MDT 2015


Hey Mike,
You've spent enough time on these suckers. 
Fire up the angle grinder and cut the brackets off
Order from Kilmartin AH197 rear spring hanger bracket x2 
Weld them on....
http://www.kas-kilmartin.com.au/AH197%20rear%20spring%20hanger%20brkt.JPG
Best
Chris

Sent from my iPhone

> On 26 Jun 2015, at 7:42 am, Michael <michael.salter at gmail.com> wrote:
> 
> I left the seized shackle pins in both sides of this BN1 when it went off to TechnoStrip in the hope that they would come loose.
> They didn't so I've spent an inordinate amount of time trying to extract them without wreaking the mounts on the frame.
> Made a special puller, applied loss of heat, drilled right through each bush, grumbled a lot but they will not move despite being subjected to massive amount of force.
> Any ideas...damaging the mounts in the chassis makes for a very tedious repair.
> Michael S.
> BN1 #174
> <WP_20150625_002.jpg>
> <WP_20150625_003.jpg>
> <WP_20150625_004.jpg>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150626/b99a0901/attachment.html>


More information about the Healeys mailing list