[Healeys] Steering Lever Removal Questions--BJ8

[Al Fuller]

I think Michael’s suggestion to put beer in the fridge before working on the steering box is supported in the repair manual: 

 

it’s called ‘pre-load’!! :)

 

Al Fuller

al at bighealey dot org

'65 BJ-8

'85 Rx-7

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Michael Salter
Sent: Monday, June 15, 2015 10:51 PM
To: Tom Felts
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Steering Lever Removal Questions--BJ8

 

Tom,

I'm not sure if this will be of much help but it may be worth reading through. 
http://www.netbug.net/blogmichael/?p=967

I would not think that it is necessary to remove the center or side rod from the lever as they should not prevent you from lifting the lever away from the box ONCE you get it released from the tapered spline..

I however would recommend that you put a couple of beers in the fridge about now.

Michael S

BN1 #174

 


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net <mailto:Healeys at autox.team.net> 
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com




-- 

If you can't fix it with a hammer, you've got an electrical problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150617/48c0187e/attachment.html>