[Healeys] BJ8 Door trim panels

[BJ8Healeys]

Stephen, the door panel does hook over the front flange with the U-channel.

 

Steve Byers

HBJ8L/36666

BJ8 Registry

AHCA Delegate at Large

Havelock, NC USA

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Stephen Hutchings
Sent: Tuesday, June 16, 2015 9:29 PM
To: Healeys List
Subject: [Healeys] BJ8 Door trim panels

 

I'm putting together the trim panels on my BJ8 doors, and I have a couple of questions about the way they fit.

I've got the clips and I can see where they match up, but I had some squeezing down at the bottom front end when closing the door. I have new trim panels and I notice that the front edge is a sort of U channel. Does this U channel wrap over the front edge of the door? The vinyl wraps over the back of the panel which would make that impossible without trimming it back, but maybe that's what I should do?

I notice there are no places for clips on the front edge.

When I took my old panels off they were non-original, and had been screwed on, so I'm learning as I go.

I've attached a photo of the edge I'm talking about, with the vinyl pulled back a little.

 

Thanks, Stephen

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150616/288da466/attachment.html>