[Healeys] Steering Box and Wire Wheel Questions--BJ8

[Michael]

Hi Gary,
I'm presently at my summer home and don't have access to my interchange database. 
I've made a note to send you the number when I'm down that way in 2 weeks.
Michael S
BN1 #174

-----Original Message-----
From: "warthodson at aol.com" <warthodson at aol.com>
Sent: ‎15/‎06/‎2015 7:43 a.m.
To: "michael.salter at gmail.com" <michael.salter at gmail.com>; "healeys at autox.team.net" <healeys at autox.team.net>
Subject: Re: [Healeys] Steering Box and Wire Wheel Questions--BJ8

Where can I get "2 CR seals each of which is 1/2 the thickness of the original"?
Gary Hodson
 
 
-----Original Message-----
From: Michael <michael.salter at gmail.com>
To: Per Schoerner <per at schoerner.se>; healeys <healeys at autox.team.net>
Sent: Sun, Jun 14, 2015 5:24 pm
Subject: Re: [Healeys] Steering Box and Wire Wheel Questions--BJ8


Interesting... 
I have always found that the problem was attributable to corrosion on the rocker shaft where the seal seats. 
I solve this by using 2 CR seals each of which is 1/2 the thickness of the original. 
I'm a little confused as to how you get a steering box in a lathe??? 
Michael S 
BN1 #174 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150615/07ad6855/attachment.html>