[Healeys] Steering Box and Wire Wheel Questions--BJ8

[Auto Farm]

               Garry, Autofarm has them in stock.  I will send you a couple when I return your shock……..another story.  Cheers…Bob

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of warthodson at aol.com
Sent: June-15-15 7:43 AM
To: michael.salter at gmail.com; healeys at autox.team.net
Subject: Re: [Healeys] Steering Box and Wire Wheel Questions--BJ8

 

Where can I get "2 CR seals each of which is 1/2 the thickness of the original"?

Gary Hodson

 

 

-----Original Message-----
From: Michael <michael.salter at gmail.com>
To: Per Schoerner <per at schoerner.se>; healeys <healeys at autox.team.net>
Sent: Sun, Jun 14, 2015 5:24 pm
Subject: Re: [Healeys] Steering Box and Wire Wheel Questions--BJ8

Interesting... 
I have always found that the problem was attributable to corrosion on the rocker shaft where the seal seats. 
I solve this by using 2 CR seals each of which is 1/2 the thickness of the original. 
I'm a little confused as to how you get a steering box in a lathe??? 
Michael S 
BN1 #174 

  _____  

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150615/554e5392/attachment.html>