[Healeys] Windscreen seal

[Michael Salter]

I would concur with Jean's observation but would also add that you should
watch for damage to the groove in the lower windshield rail.
I have encountered several where the "T" shaped groove had been crushed a
little making installation of the seal impossible. I made a little tool
from the head of a flat head nail that use to open the groove up to its
original size.

Michael S
BN1 #174

On Tue, Jun 9, 2015 at 9:52 PM, Stephen Hutchings <s.hutchings at rogers.com>
wrote:

> I've been reading over the years about what a swine of a job it is to put
> in the windscreen to body seal on a BJ8...now it's my turn.
> My problem is that the new rubber seems to be a LOT thicker where it forms
> the "T", than the old one.
> I got it from a very reputable supplier, whom I won't mention because I'm
> going to talk to him about it tomorrow and see what his take on it is.
> I just wondered if anyone one else had noticed this discrepancy on the
> replacement rubber. I have some good blunted tools that look like they'd do
> the job, but I feel like I'm trying to cram in more rubber than there is
> space for!
>
> Stephen, BJ8
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
>


-- 
*If you can't fix it with a hammer, you've got an electrical problem.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150610/201e9957/attachment.html>