[Healeys] LED Turn Signals

[Fred Wescoe]

Albert,

I did the same change out you have done and Moss could not solve the
issues.  I bought an electronic flasher unit from NAPA,installed it and
problem solved.  The cost was about out $12.  Good luck.

Fred
63BJ7

On Fri, May 29, 2015 at 3:18 PM, Albert Seminatore <alsemus1 at gmail.com>
wrote:

> Looking for some help. I put LEDs in my 1960 Austin Healey – Directional /
> parking lights, all dash lights. I worked with Moss to get the correct
> flasher unit. Everything works fine until I wash the vehicle.
>
> After washing the vehicle the dash flasher indicator, on the dash,  comes
> on and stays on. Drive the car for a bit and it will go off and come on
> randomly. Continue on driving until all is warmed up. Park it. Come back a
> half hour later and the light is off and the flasher functions correctly.
>
> First thought was water got in to the lights – opened the lights and no
> water in them.   What else could cause this temporary failure?
>
> It has happend three times so far.
>
> ..................    Al
>
>
> --
> Albert Seminatore
> Mountain Falls, Pahrump, NV
> eMail:  alsemus1 at gmail.com
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/fredwescoe@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150601/8467d737/attachment.html>