[Healeys] LED Turn Signals

[Tracy Drummond]

Don't wash the car.  

Sent from my iPhone

> On May 29, 2015, at 12:18 PM, Albert Seminatore <alsemus1 at gmail.com> wrote:
> 
> Looking for some help. I put LEDs in my 1960 Austin Healey – Directional / parking lights, all dash lights. I worked with Moss to get the correct flasher unit. Everything works fine until I wash the vehicle.
> After washing the vehicle the dash flasher indicator, on the dash,  comes on and stays on. Drive the car for a bit and it will go off and come on randomly. Continue on driving until all is warmed up. Park it. Come back a half hour later and the light is off and the flasher functions correctly.
> First thought was water got in to the lights – opened the lights and no water in them.   What else could cause this temporary failure?  
> It has happend three times so far.
> ..................    Al
> 
> 
> -- 
> Albert Seminatore
> Mountain Falls, Pahrump, NV
> eMail:  alsemus1 at gmail.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bighealey@charter.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150601/c31508ac/attachment.html>