[Healeys] Headlight relay kit

[HealeyRick]

OR .... you could just install Hella watertight relays (google it for many
sources)

Rick Neville

On Fri, Jul 3, 2015 at 9:48 AM, Al Fuller <al at bighealey.org> wrote:

> We used airtight food containers purchased at a local food store.  They
> have
> heavy-gauge plastic, gaskets, and use lever lock closures...
>
> The picture attached is not what is on my car [picture found on the web],
> but IS representative of what is on the car.
>
> Yes, we did use a grommet where the mounting screws and wire penetrated the
> plastic [also a dab of silicone sealant, if it looked like an imperfect
> seal...].
>
> As I recall, keeping the relays still to wire them up and having some order
> in there called for the relays to be mounted to a piece of thin wood inside
> the plastic closure.
>
> Good luck,
>
> Al Fuller
> al at bighealey dot org
> '65 BJ-8
> '85 Rx-7
>
> -----Original Message-----
> From: Elton Schulz [mailto:eschulz at frontiernet.net]
> Sent: Thursday, July 2, 2015 12:11 AM
> To: Al Fuller
> Subject: Re: [Healeys] Headlight relay kit
>
> Thanks for the info. Sounds like a good idea. Was this container something
> you purchased or adapt from something else? Did the wires exiting from the
> container go through some kind of grommet?
> Elton
> On 7/1/2015 3:39 PM, Al Fuller wrote:
> > Hi Elton:
> >
> > A couple of us have put the relays inside a water-tight plastic
> container,
> > and mounted it to the splash guard on the driver's side.
> >
> > Al Fuller
> > al at bighealey dot org
> > '65 BJ-8
> > '85 Rx-7
> >
> > -----Original Message-----
> > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Elton
> > Schulz
> > Sent: Saturday, June 27, 2015 11:12 PM
> > To: Healey List
> > Subject: [Healeys] Headlight relay kit
> >
> > Fellow Listers,
> > I'd like to install a headlight relay kit I obtained from Moss for my
> BJ7.
> > Where is a good spot to mount the two relays for conveniently running the
> > wiring without having to cut into the loom of the wiring harness?
> > Any photos or wiring diagrams would also be helpful.
> > Thanks in advance,
> > Elton
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html Suggested annual
> donation
> > $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> >
> > Healeys at autox.team.net
> > http://autox.team.net/mailman/listinfo/healeys
> >
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/healeys/al@bighealey.org
> >
> >
> >
> >
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeyrik@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150703/3c74a34f/attachment.html>