[Healeys] Healeys Digest, Vol 8, Issue 186

[Albert Seminatore]

Elton:  I took the grill out of my BT7.  On the drivers side at the top
there is a plate with a tapped hole.  The plate is part of the under body.
Mount the relays using this tapped hole.  Then all of your wiring will be
via bullet connectors to the existing harness.  Just follow color codes.
The red wire with a fuse.  I cut the fuse off the end leaving enough of
wire to be able to splice it back on later.   Crimp a lug onto one end of
the fuse and attach it to the battery terminal at the remote start switch
on the right side.  Take the red wire and snake it up the left side of the
car, across the fire wall over to the fuse.  I used bullet connectors to
connect the fuse to this wire.
  A rather simple task except for removing the grill.  That you have to do
from under the car!
........................        Al

Schulz
Sent: Saturday, June 27, 2015 11:12 PM
To: Healey List
Subject: [Healeys] Headlight relay kit

Fellow Listers,
I'd like to install a headlight relay kit I obtained from Moss for my BJ7.
Where is a good spot to mount the two relays for conveniently running the
wiring without having to cut into the loom of the wiring harness?
Any photos or wiring diagrams would also be helpful.
Thanks in advance,
Elton
-
Albert Seminatore
Mountain Falls, Pahrump, NV
eMail:  alsemus1 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150702/b80417ac/attachment.html>