[Healeys] spun bearings

[Oudesluys]

Ball/needle/roller bearings can only spin when the there is debris 
inside the bearing from e.g. a broken cage, balls/needles/rollers, diff 
that block the bearing causing the outer cage to turn. This happens 
mainly because people drive there cars until the bearing starts to break 
up, well into or beyond the rumbling stage.
Kees Oudesluijs




healeymanjim schreef op 31-1-2015 om 4:32:
> I have changed many seals and have always had to drive out the bearing with a brass drift and drive it back in.  cannot imagine it spinning inside, but I have been wrong many times.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2015.0.5646 / Virusdatabase: 4273/9024 - datum van uitgifte: 01/30/15
>
>