[Healeys] K&N AIRFILTERS

[John Vrugtman]

Well maybe,  the reason there are two different K&N filters is one is 
offset, just like the original so as to fit under the bonnet, tight fit 
for anything else.

John

On 1/27/2015 12:18 PM, Oudesluys wrote:
> Can't you leave the ram pipes intact and just fit a filter with a 
> bigger diameter to fit over the tulip of the ram pipes, so you will 
> have a better flow into the carbs?
> Kees Oudesluijs
>
>
> John Vrugtman schreef op 27-1-2015 om 17:26:
>> The way I did it, courtesy of an owner I met in Quebec, is to order 
>> Burlen Fuel Systems HS2S short ram kits, cut them in half, and mount 
>> these K&N filters; RA-055V and RC-2400, with band clamps.
>>
>> John
>>
>> On 1/27/2015 9:23 AM, Ge wrote:
>>>
>>> Hello list,
>>>
>>> I am considering to replace the std. airfilters by K&N airfiters. 
>>> Would like to know the experience of the forum on this.
>>>
>>> I drive a 1964 A-H 3000 BJ8 phase 2 with HD8 carbs. It was told to 
>>> me that the std . K&N would not fit because insuffient space under 
>>> the bonnet.
>>>
>>> I was advised to look for conic ones. Is this correct?  Checked the 
>>> internet ,but cannot find them.
>>>
>>> Would appreciate any comment in this matter.
>>>
>>> Regards,
>>>
>>> Ge Aagten
>>>
>>> The Netherlands
>>>
>>>
>>>
>>
>>
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150127/914937ae/attachment.html>