[Healeys] engine and piston question
Michael
michael.salter at gmail.com
Fri Jan 9 11:18:09 MST 2015
I have clamped rods in case you decide to correct that grievous Concours blunder....😁
Michael S
BN1 #174
-----Original Message-----
From: "Don Anglesey" <healey100s at live.com>
Sent: 9/01/2015 1:01 p.m.
To: "'Northside'" <nside at hiwaay.net>; "Healeys at autox.team.net" <Healeys at autox.team.net>
Subject: Re: [Healeys] engine and piston question
The 100-6 block should be a 1C/H. When I changed pistons I also had to
change out rods because my 100-6 used clamp type which are impossible to
find. If I was to do it again I would defiantly find a later 6-cyl block.
Don
57' BN4
-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Northside
Sent: Friday, January 09, 2015 10:13 AM
To: Healeys at autox.team.net
Subject: [Healeys] engine and piston question
I am rebuilding my100-6 BN4. I ordered a set of pistons. When they came in
the mechanic showed me they were too small. I have reached the conclusion
that the engine must have been swapped out at some point. The number on the
block is 29f/1H 5487. Can anyone tell from this # what the engine might be.
Thanks for any help.
Bud W
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150109/af252ac3/attachment.html>
More information about the Healeys
mailing list