[Healeys] Stripped Bolt

[Oudesluys]

I presume the tapped thread hole is stripped. You can use a helicoil to 
repair that.
You say it is a non essential bolt, but it can be high stressed?????????
Kees Oudesluijs




R. Price Lindsay schreef op 5-2-2015 om 17:46:
> I have stripped a non-essential bolt in the frame and want to replace 
> it on my BJ8.  I really don’t want to drill it out, re-tap it and use 
> a larger bolt for visual reasons.  I don’t have access to a welding 
> machine (probably a good thing).  Is there a way to re-fill the hole 
> and tap it to the correct size?  There could be a lot of stress on the 
> bolt.
>
> Price Lindsay
> 67 BJ8
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com <http://www.avg.com>
> Versie: 2015.0.5646 / Virusdatabase: 4281/9060 - datum van uitgifte: 
> 02/05/15
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150205/6281241d/attachment.html>