[Healeys] Separation - gravel valence to shroud

[Bob Spidell]

Seems it should be as close as possible w/o contacting the shroud. My 
bumper brackets won't allow mine to be any closer than about a half-inch 
(w/o grinding out the mounting slots).

Bob

ps.  Think the Brits call it a 'splash apron.'


On 8/27/2015 7:55 PM, Mark Donaldson wrote:
>
> Does anyone know for sure what the distance should be between the 
> front apron panel on a 3000 - I've usually known it as a 'gravel 
> valence' - and the bottom of the front shroud?
>
> I expect it is about 1/2 inch - as that looks about right. None of my 
> books mentions it, not even Anderson & Moment.
>
> Regards
>
> Mark
>
> Ardmore, NZ
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150827/df15c89d/attachment.html>