[Healeys] Gas Gauge

[Bob Spidell]

The gauge in our BN2 would register 3/4 full when it was topped-up. We bent the float arm down a smidge, now it reads bang on. You could try bending yours up--so the float would be lower--but, of course, full reading might be off. 

When you top up, does the gauge register full even after you've burned a few gallons? 

Bob 

----- Original Message -----



When the gas gauge on my 1960 BT7 reads 1/4, I'm out of gas. Can the sending 
unit or the gauge be adjusted? Thanks. 

Regards, 

Charlie Schott 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150825/3b9c9a9f/attachment.html>