[Healeys] Fuel Sender Gasket

sentenac.rw at gmail.com sentenac.rw at gmail.com
Mon Apr 27 12:43:02 MDT 2015

Good idea for later (and maybe for replacement) gas tanks but original
BN1 and (I think) BN2 tanks did not have the screw holes penetrating
through into the tank.  The original copper washers might seal
adequately too if they're soft enough.

In order to shoot BA helicoils into the stripped threads in my
original tank I drilled through the bottom of the screw holes, so now
I will need to watch out for those leaks, too.

BN1 #724

On Mon, 27 Apr 2015 09:48:58 -0700, you wrote:

>My sender was leaking through the screw holes up to the screw head. I used a
>screw with an "O" ring to seal the leak. I obtained the screws from Olander
>in Sunnyvale.
>-----Original Message-----
>From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
>Sent: Sunday, April 26, 2015 9:41 PM
>To: Healeys
>Subject: [Healeys] Fuel Sender Gasket
>We have a small problem with our BN2: we can't get the sender unit to
>completely seal against the tank.  

More information about the Healeys mailing list