[Healeys] Fuel Sender Gasket

John Spaur jmsdarch at sbcglobal.net
Mon Apr 27 10:48:58 MDT 2015

My sender was leaking through the screw holes up to the screw head. I used a
screw with an "O" ring to seal the leak. I obtained the screws from Olander
in Sunnyvale.


-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
Sent: Sunday, April 26, 2015 9:41 PM
To: Healeys
Subject: [Healeys] Fuel Sender Gasket


We have a small problem with our BN2: we can't get the sender unit to
completely seal against the tank.  We've tried all types of materials; inc.
the Moss rubber-like gasket, paper gasket material, cork, etc.  
This is a new tank and the flange around the opening isn't as robust as on
an original tank, and the flange on the sender has been warped somewhat,
probably by over-tightening.  The best result has been from a cork gasket my
dad fabricated, but it still seeps a little with a full tank.

Any suggestions?

Support Team.Net http://www.team.net/donate.html Suggested annual donation
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net


More information about the Healeys mailing list