[Healeys] Trunnion nut

[Fred Wescoe]

I am assembling the fulcrum pins (king pins) on the front end of my BJ7.
The manual says only "tighten the trunnion nut".  The book also says there
should be .002" of play.  Where do I measure the play and is there a
recommended torque for the trunnion nut?  I am hoping someone has done this
and can guide me on this.

Thanks,

Fred
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150424/455e3e92/attachment.html>