[Healeys] Boot lid seal

[Larry Wendland]

-----Original Message-----
From: Stephen Hutchings <s.hutchings at rogers.com>
To: healeys <healeys at autox.team.net>
Sent: Tue, Apr 21, 2015 8:56 pm
Subject: [Healeys] Boot lid seal


 Stephen, The concave side faces the lip of the shroud.  The lip
contacts the seal in the center of the concave surface ideally.  

Larry
'67
BJ8

  
Hello listers,  
  
I'm about to glue on the trunk or boot lid seal, and I see that the two edges are slightly different.    
  
  
As per my attachment, one side is more bulbous, and the other is sharper.  
  
So...which side faces in, and which side faces out?  
  
   
  
  
Thanks,  
  
Stephen, BJ8   
  
 

_______________________________________________Support Team.Nethttp://www.team.net/donate.htmlSuggested annual donation  $12.75Archive:http://www.team.net/archiveForums:http://www.team.net/forumsHealeys@autox.team.nethttp://autox.team.net/mailman/listinfo/healeysUnsubscribe/Manage:http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com