[Healeys] Front Drum Brake Back Plates

[John Harper]

Micheal

This is just from memory. the BN1 plates will have 3/8" diameter holes
where they fixes to the stub/swivel axle. Later ones are 7/16"

BN1 original part numbers are Girling GB40744-5 should you find any
numbers. The last number denotes left or right ; I cannot remember which
off hand.

I was of the opinion that BN2 and BN4/6 wire wheel were the same but I have
checked and they do seem to carry different part numbers.

Only part of what you need in the way of information but this might help.

Best regards

On 8 April 2015 at 15:41, Michael Salter <michaelsalter at gmail.com> wrote:

> I have been asked if I can supply a Right Front Brake Back Plate for a
> 100/6 with wire wheels.
> I have several right side drum brake back plates but I cannot figure out
> which are BN1, which are BN2, which are 100/6 wire wheel and which are
> 100/6 disc wheel.
> The part numbers are as follows:
> BN1 ....7H4266
> BN2....17H4157
> BN4/6  wire wheel ....1B4496
> BN4-6  disc wheel.....1B4451
> I have looked in vain for a part number and although there are subtle
> differences in the pressings I'm at a loss as to which are for which car.
> Can anyone help?
>
> Thanks,
> Michael S
> BN1 #174
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/ah100register@gmail.com
>
>
>


-- 
Best wishes

John Harper

AHC UK 100 Register Secretary
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150408/11a434f5/attachment.html>