[Healeys] Anodizing cockpit surround.

[Charlie Baldwin]

I'm pretty sure that is incorrect.  Class II clear anodizing is intended 
for interior finishes.  Class I is the exterior finish. The difference 
is the thickness of the anodic coating.  The satin finish should be 
achieved before doing the anodizing.  See http://www.anodizing.org/

On 9/2/2014 7:01 PM, John Spaur wrote:
> If it is a mirror finish, class 2 clear ano will dull it down to a gray like
> finish as original. I believe you can specify different ano finishes that
> might let the mirror finish show better.
>
> John
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/mgcharlie@comcast.net