[Healeys] Hexagon head setpin -

Jean Caron vintage_roadster_restoration at hotmail.com
Thu Oct 30 16:29:25 MDT 2014


Thanks Josef, will tap the new plates, sounds like this is what holds the
setpin.

Jean

> Date: Thu, 30 Oct 2014 19:47:00 +0100
> To: vintage_roadster_restoration at hotmail.com; Healeys at autox.team.net
> Subject: AW: [Healeys] Hexagon head setpin  -
> From: josef-eckert at t-online.de
>
> Jean,
> The centre hole in the tapped plate should be tapped.
>
> Josef Eckert
> Germany
>
> -----Original-Nachricht-----
> Betreff: [Healeys] Hexagon head setpin  -
> Datum: Thu, 30 Oct 2014 05:53:06 +0100
> Von: Jean Caron <vintage_roadster_restoration at hotmail.com>
> An: "healeys at autox.team.net" <healeys at autox.team.net>
>
> List:
> On early BN1's the door hinges have in addition of the four countersunk ,
> pozidrive bolts holding the hinge to the door post, a hexagon bolt in the
> center of the hinge plate. The Service Manual calls it a head setpin. Does
> anyone know how this bolt/setpin is attached to?
> I am assembling a door post right now, the early 100 have a reinforcement
> plate spotwelded to the back of the door post, then the cage that holds the
> tapped plate goes on and the tapped plate has that hole in the center but
it
> is not tapped, should it be?
> Or is that setpin held by something else that is not there on the parts I
> have.
>
> Jean
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/josef-eckert@t-online.de


More information about the Healeys mailing list