[Healeys] speedometer cable routing

[Kimo Briske]

On my BT7 the cable comes out at the center of the tunnel cover. [ No hole
]There is a dimple in the metal, so that it is sandwiched between the 2
pieces of the tunnel metal.  I use a piece of weatherstrip foam around it
to get a good seal. Hope this is clear. Jim


On Sat, May 24, 2014 at 5:44 AM, Bob Haskell <rchaskell at earthlink.net>wrote:

> Listers,
>
> How does the speedometer cable run from the underside of the gearbox cover
> to behind the dash?  6 cylinder - side shift gearbox with the metal gearbox
> cover and metal extension piece?
>
> Cheers,
>
> Bob Haskell
> AHCA 3000 Mk I registrar
> http://www.ciahc.org/registry_3000mk1.php
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/kimobriske at gmail.com