[Healeys] alloy brake / clutch master cylinders

Oudesluys coudesluijs at chello.nl
Fri Mar 28 02:26:15 MDT 2014


After honing you need to polish the surface using wet&dry 400 of finer 
and some metal polish.
Kees Oudesluijs


Darin Graber schreef op 28-3-2014 6:28:
> Greetings -
>
>      Am I missing something?  I have rebuilt these on british cars
> before and I have never had the trouble I have had on these!  They are
> original master cylinders off of a '57 100-6 and I have tried several
> different rebuild kits (including Moss) and none seem to fit or work worth a
> darn!  The pistons freeze up, they don't pump fluid or return when pushed it,
> etc.  Is there something that needs to be done to the cylinder itself?  I have
> honed these lightly but because they are alloy, did I just ruin them.  Any
> insight would be appreciated.  Thanks!
>
> Darin
> '57 100-6
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4354 / Virusdatabase: 3722/7256 - datum van uitgifte: 03/27/14


More information about the Healeys mailing list