[Healeys] Heater motor

Rick Swain rjswain at hotmail.com
Thu Mar 27 18:31:28 MDT 2014


Neat idea John. Would have made attaching the ductwork much easier when I did
it.
Rick

> Hint. The blower motor is easy to put back on. The difficulty comes in
> attaching the ductwork. A simple solution is to use 6 inch lag screws and
> screw then through the fender well to the blower motor about one half inch
> into the blower motor bracket clip nuts. This will enable you to wobble the
> blower motor (using a friend) and more easily attach the ducts. When this
is
> done, pull the blower motor to the fender and replace the lag screws one at
> a time with the proper bolts.
>
> John Sims, BN6
> Aberdeen, NJ


More information about the Healeys mailing list