[Healeys] Heater motor

[Rick Swain]

The heater motor (with mounting brackets) is held in place on the inner fender
with 4 bolts that thread into the brackets. The bolt heads are accessible from
the right front wheel well. Once you take off the flexible tubing the heater
comes up through the bonnet opening, with a certain amount of twisting and
turning. On second thought, on a BJ8, (I have a BN4) one of the horns may be
in the way. Easy enough to remove the horn.
Rick Swain'59 BN4

> From: jc9821 at msn.com
> To: healeys at autox.team.net
> Date: Thu, 27 Mar 2014 08:58:54 -0700
> Subject: [Healeys] Heater motor
>
> If I activate the heater switch I have on and off power to my heater motor
but
> it does not operate. Can the motor be removed without major removal of
other
> components around it?
> Which direction do I attack from, above or below?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rjswain@hotmail.com