[Healeys] (no subject)

[Per Schoerner]

Hi
When you're doing such kind of jobs you really should have the workshop 
manual. The cost for this book is around the cost of one hours labour, 
so it's not a fortune and will save a lot.

Per

Austin Healey skrev 2014-03-21 08:46:
> If You are not 100% sure in what You are doing, I would suggest You to call
> a specialist to check that what You have done is correct or not. It is far
> more cheaper and easier then dismantling and doing the timing again.
>
> Gergo