[Healeys] Facet Fuel Pumps (Was: Why Carry Spares?)

[Tracy Drummond]

I have used both the older metal square versions and the newer black resin
molded bodied versions. The psi is really low like 2 or 3 psi.   I run
standard Su carbs.  I have converted to neg ground.  However they can also be
wired a positive ground.  I think folks over complicate all this.

Sent from my iPhone

> On Mar 20, 2014, at 7:10 AM, paul negus <healeybn4 at yahoo.com> wrote:
>
> Hi Tracy
>
> Which type of Facet pump have you been using please? I'd be
> interested to know the nominal output pressure and whether you have found a
> pressure regulator necessary. (Does the engine run standard SUs?)
>
> Regards
> Paul
> Date: Wed, 19 Mar 2014 20:27:55 -0700
> From: "Tracy Drummond"
> <bighealey at charter.net>
>
> Been running two facet pumps in series for about 7
> years. They work great in
> series.  I switch back and forth once in a while and
> have the center
> position for theft deterrent under dash.  I did run two wires
> in a sheath
> (off road driving lights wiring leftover from fog light relay
> project) all
> the way from front to back. I never had one go out and still
> carry another
> in the boot.  I have loaned the boot one out a few times. :-)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bighealey@charter.net