[Healeys] Hinge pillar issue on BT7

[Charlie Schott]

Richard,

I had a similar problem with my BT7 and fixed it by putting it on a frame 
rack and pulling the door pillar forward.

Regards,

Charlie Schott

-----Original Message----- 
From: richard mayor
Sent: Sunday, June 15, 2014 7:14 PM
To: healeys
Subject: [Healeys] Hinge pillar issue on BT7

I need to move my hinge pillar forward 1/4".   Car suffered front corner
damage and frame was bent.  Frame was professionally straightened... I'm
told...and new front cross-member was welded in.  Everything looks really
good.   I got the car in pieces over 10 years ago.  I am finally, getting it
all back together.  Front fender tabs fit tight against the hinge pillar but
fender is 1/4" short of matching the headlight opening on the shroud.   Gap
fit between front edge of door and rear of front fender is perfect.  There 
is
no gap at rear of door. I need everything moved forward 1/4" to get a good 
gap
at rear of door and have front fender match the shroud.

Any suggestions?
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/schottc@knology.net 

[demime 1.01d removed an attachment of type image/jpeg which had a name of DSCN3007.JPG]