[Healeys] vinyl piping
Michael
michael.salter at gmail.com
Sat Jul 19 07:38:03 MDT 2014
Hi John,
I believe that originally the piping was glued to the aluminium with contact
cement.
I recently installed mine that way and found that it was quite east to get the
piping correctly positioned.
Michael S
BN1 #174
-----Original Message-----
From: "JOHN BAHE SR" <johnbahesr at gmail.com>
Sent: b7/b19/b2014 9:27 AM
To: "healeys at autox.team.net" <healeys at autox.team.net>
Subject: [Healeys] vinyl piping
Anyone have an easy way or best method to install the piping on the
aluminum door finisher that attaches to the shut pillar? Do you have to
remove the trim or can you install with the trim attached but loose? Any
suggestions are appreciated.
Thanks,
John A Bahe Sr.
johnbahesr at gmail.com
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
More information about the Healeys
mailing list