[Healeys] vinyl piping

[Bob Spidell]

Been a while since I did this, but think you can just loosen all the Al door finisher screws, remove one screw at a 
time, work the piping--flat part--into the gap, punch a hole, replace that screw and move to the next.

Bob


On 7/19/2014 6:27 AM, JOHN BAHE SR wrote:
> Anyone have an easy way or  best method to install the piping on the
> aluminum door finisher that attaches to the shut pillar?   Do you have to
> remove the trim or can you install with the trim attached but loose?  Any
> suggestions are appreciated.
>
> Thanks,
> John A Bahe Sr.
> johnbahesr at gmail.com
> _______________________________________________
>
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************