[Healeys] Safety gauge - resolved

[john]

The tech at Palo Alto Speedometer told me the bulb needs to have the correct
ether fill level; not too much or too little. The volume can vary depending
on the temperature when filled. When the gauge was repaired they noticed the
bulb may have had a "spot" of solder on it that may have damaged the bulb
when it was installed in the block.

John

-----Original Message-----
From: dwflagg at juno.com [mailto:dwflagg at juno.com] 
Sent: Saturday, July 5, 2014 6:33 PM
To: michael.salter at gmail.com
Cc: jmsdarch at sbcglobal.net; healeys at autox.team.net
Subject: Re: [Healeys] Safety gauge - resolved

ether assumption is correct!!