[Healeys] BJ8 tunnel attachment screw holes

[Michael Salter]

Hi Ken, I have had good luck using a hammer and dolly to gently flatten the
area where the hole is.

Michael S
BN1 #174

-----Original Message-----
From: "goldengt at cal.net" <goldengt at cal.net>
Sent: b31/b01/b2014 1:57 p.m.
To: "healeys" <healeys at autox.team.net>
Subject: [Healeys] BJ8 tunnel attachment screw holes

I couldn't seem to get into the archives. Does someone have a way of making
the tunnel attachment screw holes back to the standard size without welding
them? I don't want to be using ever bigger screws.
Same for the inner sill aluminium trim screw holes.
Thanks,
Ken Freese
65 BJ8
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com