[Healeys] Oil Pressure Guage

[Oudesluys]

Just a small fiber ring.
Kees Oudesluijs

JOHN BAHE SR schreef op 23-2-2014 15:43:
> I am in the process of replacing my safety gauge on my BJ8 after it was
> rebuilt due to a sticking oil pressure needle:  Is it necessary to use some
> sort of thread sealant on the fastener that holds the capillary tube in
> place??  Any advice would be appreciated.
>
> Thanks,
> John
>
>
> On Fri, Feb 21, 2014 at 6:31 AM, R Phillips <healeydriver1 at gmail.com> wrote:
>
>> My Smith's oil pressure gauge on my BJ8 will stick well below it's actual
>> reading especially when cold.  A few taps on the glass will bring it up to
>> correct reading but may or may not stick on the way down as it heats up.
>> Any solutions or just live with it?
>>
>> Thanks,
>>
>> Ric
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/johnbahesr@gmail.com