[Healeys] Fuel pump's psi & 3/8" unf k-nuts.

[Oudesluys]

Webers, DellOrto's etc. need 3-4psi. If the pressure is higher the float 
valves may start to leak.
Kees Oudesluijs


Simon Lachlan schreef op 13-2-2014 15:39:
> I have an AZX1500 pump in my MkII BT7. (Double ended SU). This is basically
> 2 AUF 301 mated together. Although one can run both at once, it's not
> usually necessary and one might say that one half is a reserve for the
> other. I have mine independently switched.....either, both or none depending
> on the switches.
>
> So, finally to the point.....
>
> I'm in the slow throes of fitting 3 Weber 45 dcoe 9s. I've got them in and
> running. One of them drips a little fuel which I'd put down to it needing
> any one of a zillion adjustments. I was speaking to Webcon, here in UK,
> about something else and I mentioned the drip. The guy said that Webers only
> require +/- 3psi and that my pump was probably putting out more like 5psi
> per side. Any ideas?
>
>   
>
> And does anyone know where I can get more of those wretched little 3/8" unf
> "k-nuts"? I'll be taking my Webers out at some stage and I suspect that
> these things can only be used once. Or am I wrong?
>
>   
>
> Thanks,
>
> Simon.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4335 / Virusdatabase: 3697/7088 - datum van uitgifte: 02/12/14