[Healeys] Which side out?

[David Porter]

...as a general method I put the metal side against the head, thinking that
it acts as a sort of heat sink and helps "cool" the head. It also is a bit
easier to clean the manifolds than the head when the gasket sticks. 
Dave

frogeye at porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
Porter Custom Bicycles

gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

GO HERE: http://porterbikes.com/  nice pictures-fun facts-my world

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Michael Salter
Sent: Saturday, February 08, 2014 12:25 PM
To: Mike Tobin; healeys at autox.team.net
Subject: Re: [Healeys] Which side out?

As far as I know Mike it is down to your personal preference.
Did you check the archives?
Michael S
BN1 #174

-----Original Message-----
From: "Mike Tobin" <ahbt71 at gmail.com>
Sent: b
9/b
02/b
2014 4:19 a.m.
To: "healeys at autox.team.net" <healeys at autox.team.net>
Subject: [Healeys] Which side out?

It's been way too long since I took the lump apart.  On the manifold to
head gasket which side goes against the manifolds the fiber or metal?
Cheers,
Mike Tobin
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com