[Healeys] Lempert 3.54 gears install

[Alan Seigrist]

Have a proper gear shop install the ring and pinion, this is not a job for
a home mechanic.  I can rebuild almost anything on the car, I personally
would not go near the pumpkin.


On Wed, Feb 5, 2014 at 6:07 PM, Tom <ah3000me at gmail.com> wrote:

> Hi,
>
> I bought a set of the Lempert 3.54 gears from Dan Lempert recently, and I'm
> planning on installing them next month.   A friend has offered the use of
> his garage and lift, so I'm trying to make sure I have everything I need
> before I start.
>
> While I'm changing the gears, what else should I consider replacing at the
> same time?   What tools are required to do this?
>
> If anyone has any tips or tricks to share, I would greatly appreciate them.
>
> - Tom
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com