[Healeys] 3000 front crank oil slinger

David Nock BCS healeydoc at sbcglobal.net
Tue Feb 4 10:36:34 MST 2014


Yes the cut out in the slinger is there only to install it over the outer 
key.



David Nock
British Car Specialists
Stockton Ca 209 948 8767
www.britishcarspecialists.com
-----Original Message----- 
From: goldengt at cal.net
Sent: Monday, February 03, 2014 5:24 PM
To: David Nock BCS
Cc: healeys at autox.team.net ; Per Schoerner
Subject: Re: [Healeys] 3000 front crank oil slinger

Thanks, I understand now. The keyway in the slinger is sort of a clearance 
key way and just lets the slinger get past the key. The alignment of the 
keyway on the slinger is not functional.
Ken


----- Original Message -----
From: "David Nock BCS" <healeydoc at sbcglobal.net>
To: "Per Schoerner" <per at schoerner.se>, goldengt at cal.net
Cc: healeys at autox.team.net
Sent: Monday, February 3, 2014 4:35:44 PM
Subject: Re: [Healeys] 3000 front crank oil slinger

The oil slinger does not use the key way to hold in place. It is pinched
between the crank pulley and the crank gear



David Nock
British Car Specialists
Stockton Ca 209 948 8767
www.britishcarspecialists.com
-----Original Message----- 
From: Per Schoerner
Sent: Monday, February 03, 2014 3:48 PM
To: goldengt at cal.net
Cc: healeys at autox.team.net
Subject: Re: [Healeys] 3000 front crank oil slinger

Ken
I don't get it.
There is a camshaft gear, an oil centrifugal washer and the damper/fan
belt pulley. There are two wudruff keys, one for the cam gear and one
for the damper. Everything should be fastened with the big nut to a very
high moment. There should be no gaps. If there is any gap then things
will break I think. I don't think there is any problem if the
centrifugal washer is not aligned with the wodruff key. You have to use
shims to align the cam gear with the gear on the cam. If the fan belt is
unaligned I suppose you can use shims there too, or move the pulley on
the water pump a little.

Per

goldengt at cal.net skrev 2014-02-03 18:11:
> Per,
> The crankshaft diameter is normal and the aftermarket damper diameter
fit feels ok. The woodruff key is .975 in length. Is that normal?
> Ken
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net 


More information about the Healeys mailing list