[Healeys] BN2 Scuttle-Door Seal

[Bob Spidell]

BN2s have a rather elaborate seal contraption along the outside edges of the scuttle and the top front part of the doors (the seal is held by a hook-shaped strip of metal and some quarter-round pieces which are screwed to the inner part of the door hinge part). Does anyone have a good set of photos of these? 

The Moss parts come with good instructions, but it seems both screws and pop rivets are used; I need to know which goes where. 

TIA, 
Bob 

-------------------------------- 
Bob Spidell - San Jose, CA 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20141229/c68410e7/attachment.html>