[Healeys] brake cylinder problem

[Bob Spidell]

If you're using DoT 3/4 and the 'crud' is gelatinous (howdayalikethatword?) I've seen this before. Happened to our 
BN2--with fresh parts and fluid--after it sat for a couple years.

Otherwise, all I can suggest is total cleanout/rebuild of your system and/or try another brand of brake fluid.

Bos





On 4/30/2014 4:51 PM, Bill Plck wrote:
> Can anyone give me advise on how to prevent the build up of a
> whiteish-brownish crud in brake cylinders. Its so bad that a piston has
> frozen to the inside of one cylinder leaving no braking on the left
> front.  Is there a cause and fix for this crud buildup problem.  Thanks
> for any advice.
>
> Bill Pollock   100 6
>
> ------------------------------------------------------------------------
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************