[Healeys] Fwd: Re: Mating O/D and Transmission

[Elton Schulz]

Sorry, I responded to the wrong note. Should have been Mating O/D and 
Transmission.
Elton


-------- Original Message --------
Subject: 	Re: [Healeys] Pistons
Date: 	Sun, 13 Apr 2014 21:24:16 -0400
From: 	Elton Schulz <eschulz at frontiernet.net>
To: 	healeys at autox.team.net



I found it impossible to align the bottom spline with a long screw
driver. So I made a "T" section with a long handle. The horizontal piece
of the T is one and one eighth inches long by one eighth inches thick
welded to the long handle. It fits between the splines and makes it easy
to align the splines.
Elton
On 4/13/2014 7:33 PM, Herbert Miller wrote:
> What is the recommendation for pistons for a BJ8 engine rebuild?
>
>
>
> Herb Miller
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz@frontiernet.net