[Healeys] Pistons

[Elton Schulz]

I found it impossible to align the bottom spline with a long screw 
driver. So I made a "T" section with a long handle. The horizontal piece 
of the T is one and one eighth inches long by one eighth inches thick 
welded to the long handle. It fits between the splines and makes it easy 
to align the splines.
Elton
On 4/13/2014 7:33 PM, Herbert Miller wrote:
> What is the recommendation for pistons for a BJ8 engine rebuild?
>
>   
>
> Herb Miller
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz@frontiernet.net