[Healeys] sway bar

[Peter & Veronica]

Hi Keith

The hole for the sway bar link should be towards the chassis not towards the 
wheel

Cheers

Peter Linn
Brisbane Oz
BN1 Ward Spl coupe
BN1 V6
BN1 Ausca

-----Original Message----- 
From: Keith Taylor
Sent: Sunday, October 13, 2013 1:33 PM
To: healeys
Subject: [Healeys] sway bar

I have an issue with my sway bar on a BN2 with only 21 miles up the
top bush has worn out
I "think" the wishbone brackets are mounted on the wrong sides ie.
the mounting hole is located closer to the wheel not towards the
centre  . Illustrations are scarce the moss cat c 2010 p64 shows the
mounting hole towards the centre Anyone willing to look under their
car to confirm   THANKS

Keith Taylor  Umina Beach    OZ

BN1
BN2
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/greylinn@ozemail.com.au