[Healeys] Need main bearing rear cap

[Alan Seigrist]

Ooohhh, these are cut direct from the block at the factory, so it's not
really a swap out item.  You either fix the crack or get a new block.  I
would assume the stresses on the caps can be managed properly if the cap is
properly heated and cooled after welding ... and old timer machinist should
know how to do this.


On Wed, Oct 2, 2013 at 11:18 PM, Kenneth Lybolt <lyboltinsurance at hotmail.com
> wrote:

> My 64 3000 has a crack in the rear main bearing cap. Not available from
> Moss
> or Victoria british. Hope someone has a blown engine used for parts that
> might
> have one. Any big healey engine will work. Ken at
> lyboltinsurance at hotmail.com
> or 248-495-8641. Thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com