[Healeys] Need main bearing rear cap

[rrengineer.mike]

Line boring might work, but you will be lucky to find a main bearing cap that lines up with the original line bore close enough so you only have to do a cleanup line bore. B It may have been bored originally pretty far off radial wise or to the left or right of the horizontal. B My restorer friend used to have a box full of extra main caps that he picked from to find one close enough to work. B Even that did not always work. I wish you luck.
Mike MacLean
56 BN2
60 AN5

-------- Original message --------
From: Oudesluys <coudesluijs at chello.nl> 
Date:  
To: healeys at autox.team.net 
Subject: Re: [Healeys] Need main bearing rear cap 
 
Op 2-10-2013 17:18, Kenneth Lybolt schreef:
> My 64 3000 has a crack in the rear main bearing cap. Not available from Moss
> or Victoria british. Hope someone has a blown engine used for parts that might
> have one. Any big healey engine will work. Ken at lyboltinsurance at hotmail.com
> or 248-495-8641. Thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donationB  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
You will have to line bore when using a new cap or one from another 
engine. Failing to do so will result in immediate bearing failure in 
most cases.
Kees Oudesluijs
NL
Suggested annual donationB  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net