[Healeys] Powder on Springs

Austin Healey pajtamuvek at gmail.com
Sun May 12 05:19:40 MDT 2013


For longevity a good protective primer is a must. It is there to for a
chemical barrier against corrosion, not phisical cover against water.

Gergo


2013/5/12 Larry Varley <varley at cosmos.net.au>

> I agree with Kees here, in any form of coating surface preparation is
> critical, and I have seen far too many cases of rust under powder coating.
> It looks good but how well is it stuck. I would also be wary of any coating
> that involved heat and springs. If you take a look at any good industrial
> paint spec for steel, it will be sand blast, to provide a semi rough
> surface for mechanical adhesion of the primer, then top coat. In fact as
> long as the surface is sand blasted even the primer step can be optional.
> Cheers
> Larry
>
>
> On 12/05/2013 6:25 PM, Oudesluys wrote:
>
>> These relatively low temperatures for curing the powder coat can have
>> significant effect on steel springs, especially springs made from BS 2056
>> En 58A/56 steel, stainless steel (n.a. in this case) and low alloy carbon
>> steel are prone to this
>> The problem with powder coating is that the adhesion to the metal is not
>> always as it should and (serious) corrosion can creep under the coating
>> without you seeing it until it flakes of. Although it looks nice and shiny
>> when all is OK, it just looks to perfect as it also evens out many original
>> small imperfections.
>> I prefer the old fashioned way of primer and chassis black with the
>> imperfections in the metal visible. It is also easier to de-rust and touch
>> up.
>> Kees Oudesluijs
>> NL
>>
>> Op 12-5-2013 3:36, Charlie Frazer schreef:
>>
>>> I was a little surprised to read the suggestion in a recent post that
>>> powder
>>> coating on front springs caused the springs to sag.
>>> Is it true that a temp as low as 400 degrees could take the temper out of
>>> spring steel?
>>> More specifically, do listers recommend against powder coating suspension
>>> parts such as springs and A-arms?
>>> Thanks,
>>> ______________________________**_________________
>>> Support Team.Net http://www.team.net/donate.**html<http://www.team.net/donate.html>
>>> Suggested annual donation  $12.75
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>>
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>>>
>>> Unsubscribe/Manage: http://autox.team.net/mailman/**
>>> options/healeys/coudesluijs@**chello.nl<http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl>
>>>
>>>
>>>
>>> -----
>>> Geen virus gevonden in dit bericht.
>>> Gecontroleerd door AVG - www.avg.com
>>> Versie: 2013.0.3336 / Virusdatabase: 3162/6316 - datum van uitgifte:
>>> 05/11/13
>>>
>> ______________________________**_________________
> Support Team.Net http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/pajtamuvek@**gmail.com<http://autox.team.net/mailman/options/healeys/pajtamuvek@gmail.com>


More information about the Healeys mailing list