[Healeys] BN2 Flooding Problem
Larry Wendland
bighealey3k at aim.com
Sun Mar 31 17:48:35 MDT 2013
Have you checked the front float to see if it has sunk. If it has fluid in it
(take it out and shake it), if it does it has a crack in it and is drawing
fuel in to it when every thing cools off. They are hard to fix once they
start sucking fuel in to them. It is best to replace it. Just a thought.
Larry
'67 BJ8
-----Original Message-----
From: Bob Spidell <bspidell at comcast.net>
To: healeylist <healeys at autox.team.net>
Sent: Sun, Mar 31, 2013 4:53 pm
Subject: [Healeys] BN2 Flooding Problem
Our BN2 (100M) runs like a jeweled-watch, with one exception: the front
carburettor floods occasionally. We've cleaned
the float bowls, and tried 3 different types of valves--including Grosse
Jets--but it still floods. Usually, it's after
the car has been sitting a while without running, but it's always the front
carb
though we've swapped valves around
several times.
Anyone encountered this problem? Any suggestions and, of course solutions
welcome.
TIA,
Bob
--
*******************************************************************
Bob Spidell San Jose, CA bspidell at comcast.net
*******************************************************************
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com
More information about the Healeys
mailing list