[Healeys] BT7 Seat Rail Attachment

[Magnus Karlsson]

The top of the floor pan is covered with tar paper and the metal strips go on
top of the paper on top of the floor. They don4t go below the floor pan.

Magnus Karlsson

www.concourshealeys.com



15 mar 2013 kl. 04:19 skrev "Charlie Schott" <schottc at knology.net>:

> Since I bought my Healey completely disassembled, I'm trying to establish
how the seat rails are attached to the floor pans. I found four metal strips,
1 5/8 X 15 with 3 holes for the tee nuts, that are corroded beyond use. I've
made new ones and I think that they go below the floor pan. They also were
covered with remnants of tar paper (not sure this was original). To add to the
confusion, I can't find them in the Moss catalog. Also, since the holes in the
floor plan are extruded upward, the new wood pieces I bought from Moss don't
sit flat on the floor. Should I pound the floor flat?
> Do the wood pieces sit inside cut outs of the carpet? Are the wood pieces
bare or painted?
>
> Also, I would appreciate it it someone would tell me how the flat and lock
washers stack up on the top and the bottom of the rails.
>
> In case you haven't noticed, I have an obsession with originality (Hey,
that's really the only way to do it). Thanks for your help.
>
> Regards,
>
> Charlie Schott
> ,